Professional Face and Body Gold RF Microneedling Device with Ice Hammer for Shrink Pores, Fill Acne Scars, Lift Sagging Skin, Erase Wrinkles, Stop Oily Skin and Reduce Blackheads

How to used?

1. Attach the handle holder and connect the handle cable to the device (do not rotate when inserting the device; simply insert it directly).

2. Connect the power cord and press the power button.

3. Select the corresponding gold microneedle probe: The non-invasive microneedle probe is for daily care and will not break the skin. The other three are invasive microneedles and will break the skin. The 10-pin probe is for the eye area and nose, the 25-pin probe is for the face, and the 64-pin probe is for the body.

4. Enter the interface and select the function you want to operate on: A is for the face, M is for the body, and I is for the ice hammer.

5. Select parameters according to your needs: Enter the A or M area interface (the A/M interfaces are the same), and select manual/automatic needle withdrawal (manual mode is recommended for beginners), needle depth (depth range 0.2mm-4.0mm, this represents the depth to which the needle penetrates the skin), and needle speed (speed range 0.1s-2.8s,this represents the time the needle stays in the skin; the higher the speed, the longer the needle stays in the skin), and radiofrequency energy intensity (RF energy range 10W-200W, this represents the energy emitted by the radiofrequency after the needle enters the skin).

6. If using invasive microneedles, apply numbing cream or a numbing patch to the treatment area. After 20 minutes, once the facial numbing cream has taken effect, apply medical-grade sterile gel or hyaluronic acid serum before starting the microneedling procedure.

7. After the procedure, press pause and apply a medical sheet masks to the face.

8. Select "I" on the interface to enter the ice hammer interface. Adjust the ice head energy (range 1-5; the higher the energy, the colder the ice hammer). Sterilize the ice hammer head. After selecting the energy, press the on-screen start button. The ice hammer head will slide in circles on the sheet mask to cool and reduce redness on the face.

Note:

After using invasive needles, scabbing and redness on the face are normal.

Avoid contact with tap water on the day of the procedure. If the face is too dry, use a medical sheet mask or medical spray to moisturize.

Within 24 hours to one week, you can wash with saline solution (do not use tap water). Use medical-grade skincare products, and apply a medical-grade sheet mask twice a day, morning and evening, to moisturize and use physical sun protection.

After one week, once the skin has healed and the scabs have formed, you can use the non-invasive microneedling for daily care, but moisturizing and physical sun protection are still necessary.

Do not apply makeup for two weeks after using the invasive microneedling.

Frequency of use: Non-invasive microneedling once a week; invasive microneedling once every 1-1.5 months. After using the invasive microneedling, wait at least one week before using the non-invasive microneedling to avoid damaging the skin before it has healed.

Replacement instructions: Replace the non-invasive microneedling after 3-5 uses (disinfect the probe surface with alcohol after each use). The invasive microneedling is for single use only.

Precautions:

1.Be sure to keep the probe flat against the skin during operation

2.marking contraindicated areas: nerve areas, bone edges, intra-orbital, as well as the navel, buttocks, breast tissue, thyroid and other parts of the operation is strictly prohibited; contraindicated parts of the line should be drawn in the posture of the application of the line, in order to prevent displacement

3.Do not apply treatment directly to the neurological area around the jaw

4.After the treatment, in order to repair the skin, apply moisturising and repairing products morning and evening. The scabs should come off naturally and should not be peeled off by hand

5.Apply sunscreen and avoid direct UV rays.Avoid intense sports, swimming, sauna, etc. for a short period of time

6. Prohibit the intake of alcohol for a short period of time. Alcohol will make the redness last for a long time and is not conducive to repair, so it is recommended to prohibit it

7.Do not repeat the process on the same area multiple times, otherwise it will affect the scab removal effect

8.If the treatment area has been injected with artificial fillers, it is not recommended; truthfully inform the doctor whether the treatment area has been injected with hyaluronic acid or collagen in the last six months; operate only after 3-6 months of micro-plastic surgery

9.Do not operate if the skin is unstable

10.Patients with serious diseases are not allowed to operate

11.People with skin diseases should not operate

12.Do not operate if you have heart disease or cardiac pacemaker

13.Pregnancy,menstruation,breastfeeding,diabetes,high blood pressure, metal in the body, etc. is not recommended treatment

14.This product must be used strictly in accordance with the use of this manual, misuse and misuse of methods other than the instructions lead to all the consequences of their own responsibility, the company does not assume any responsibility

Specifications

Material:ABS

Power:max350W

Packaging size: 54*42*33cm

Packaging weight: 7200g

Packing List

Machine*1

Handles*2

Microneedle*4

Power Cord *1

Manual*1