IPL - Hair Removal T023IGBT, The Dual-Pulse and Ice-Cool IPL Hair Removal. Fast, Painless, Clinic-Level Results
- days
- :
- hours
- :
- min
- :
- sec
- * 【 Exclusive Dual-Pulse Technology】The exclusive Dual-Pulse Flash Mode releases two consecutive high-energy pulses per trigger. With an energy density of up to 6.4J/cm², this mode acts deeper and more thoroughly on hair follicles than traditional single pulses, significantly improving single-treatment efficiency and accelerating the hair reduction process.
- * 【Sapphire Ice-Cooling】The treatment head integrates a sapphire crystal cooling panel combined with a semiconductor cooling system. It continuously cools the epidermis to 15-25°C during the flash, effectively neutralizing the burning sensation caused by the photothermal effect. This provides a consistently cool and pain-free experience from start to finish, eliminating discomfort.
- * 【Intelligent Skin Tone Recognition】Equipped with an intelligent skin tone recognition sensor that automatically detects skin type. The device intelligently matches and locks in a safe energy level based on this, preventing burns from incorrect energy or ineffective treatment, ensuring every operation is precise and reassuring.
- * 【High-Energy Broad-Spectrum IPL】Utilizes professional 560-1200nm broad-spectrum IPL technology, featuring concentrated energy and strong penetration. It precisely destroys hair follicles while stimulating collagen regeneration, delivering additional skin rejuvenation effects such as shrinking pores and brightening skin tone, achieving "Hair Removal & Skin Rejuvenation 2-in-1".
- * 【Multiple Safety Certifications】The core employs imported quartz lamp tubes, providing up to 400,000 effective flashes for long-lasting use. The product has passed multiple international safety certifications including CE, RoHS, FCC, and FDA. It incorporates multiple safety mechanisms such as skin contact sensing and overheating protection, ensuring efficiency and safety for home use.
How to use?
1.Insert the plug into a power socket and the device gets in standby.
2.Powered ON: With the device in standby, press and hold the “power button” for about 2 seconds, the device will be powered on at the first intensity level setting with a one beeping sounds, at the same time the Fan and lce-cold care function begin working.(With the device Powered on, the device automatically enters “Manual Emit Flash Mode”and “double pulse exposure mode”)
3.Powered OFF: Press and hold the “power button” forabout 2 seconds, the display screen will stop lighting, and the device poweredoff after a one beeping sound, and only fan continues working for another 15seconds after device powered off.
4.Intensity Level Adjustment: With the device Powered on, short press the “power button”to adjust the treatment intensity level in a cycle-atotal of 5 levels. First-time users should start the first session at the lowestintensity level. You can gradually increase the intensity level.
5. Put on the goggles, hold the device perpendicular to your skin, short press the “Flash Button”, and begin hair removal.
6.Mode switch:During device working, take away device from the skin, press and hold the “Flash Button” for about 2 seconds, if there is one beeping sounds and Flash Ready Light lights with blinking, the device is switched into "Auto Emit Flash mode", if there is one beeping sounds and Flash Ready Light lighting on,the device is switched into "Manual Emit Flash mode".
Manual Emit Flash mode Notes:
1). In “Manual Emit Flash mode”, if the Device probe is not in full contact with the skin, the Flash Ready Light will light on and the device does not emit the flash when pressing the “Flash Button”.
2). In “Manual Emit Flash mode", if the Device probe fully contact with the skin but not press the “Flash Button” to trigger a flash, the Flash Ready Light will light with blinking.
3). lf the Light Exit Window is close to the skin and does not move, and the flash is continuously exposed for 8 second, Flash Ready Light will be light without blinking and device stop emitting flash.
4)."Manual Emit Flash mode" is recommended for small area hair removal;
Auto Emit Flash mode Notes:
1). In "Auto Emit Flash mode", if the Device probe is not in full contact with the skin, the Flash Ready Light will light with blinking and the device does not emit the flash.
2). lf the Light Exit Window is close to the skin and does not move, and the flash is continuously exposed for 8 second, Flash Ready Light will be light with blinking and device stop emitting flash.
3)."Auto Emit Flash mode" is recommended for large area hair removal.
4).Ensure that the ENTIRE AREA receives treatment, but DO NOT overlap
treatment pulses.
Precautions:
1). After using the device, DO NOT apply any fragrant skin care or cosmetic product on your skin.
2). DO NOT use deodorant immediately after using the device on the armpits.Wait until the skin redness completely disappears to start using deodorant.
3). After each treatment, make sure your skin doesn't show any signs of redness after 24 hours.
4). Keep the treated area covered and away from direct sunlight two weeks after the treatment or use sunscreen (SPF30+) on the treated area.
5).Please perform a skin test and read the instructions carefully before use.
Specifications:
Irradiation area:Light outlet 3.0cm²
Power supply:Input: 100-240V~50/60Hz,1.5A Output:24V=2.7A
Output power:≤48W
Wavelength:560-1200nm
Max.Fluence:6.4J/cm²
Pulse duration:＜12ms
Output energy:0.5J-19.2J
Service life:400,000 flashes
Product size:11.6*21.8*4.2cm
Product weight:350g
Package size:26.6*19.7*9.5cm
Package weight:1230g
Packing List:
Hair Removal*1
Power Adaptor*1
Instruction Manual*1
Safety Glasses*1