LASER FacialPure 5.0, Brilliant Black Technology Small Suitcase Laser Picosecond Machine, Painless, Non-Invasive Tattoo & Eyebrow Removal

1. Clean the treatment area. Apply a thick layer of gel before eyebrow treatment.
2. Start from the end of the eyebrow. After treatment, wipe away the gel and follow the recommended aftercare procedure.
3. If the skin remains intact, avoid water for approximately 24 hours. If the skin is broken, avoid water until the area has formed a scab and recovered.
4. For normal-colour eyebrows, operate close to the skin. If the desired response is not achieved, gradually increase the distance, but do not exceed approximately 1 cm.
5. Treat each eyebrow area only once during a session. Do not repeatedly operate over the same area.
6. Do not set the operating frequency too high.
7. Eyeliner treatment is not recommended for beginners. Become familiar with eyebrow treatment first.
8. Check the treatment area for inflammation or irritation before use. Users with a tendency toward scarring or allergic reactions should use extra caution.
9. Keep the treated area clean. Avoid friction, makeup, facial masks, alcohol, strenuous exercise and excessive sun exposure during recovery.

1. People who have undergone eyebrow removal many times.
2. People who are highly prone to scarring.
3. People with very deep eyebrow tattoos.
4. People with unrealistic or excessively demanding expectations regarding treatment results.

1. Recommended operating distance: approximately 1–3 cm from the skin.
2. Treatment is generally not recommended for tattoos less than one year old.
3. Clean the treatment area thoroughly before operation.
4. After treatment, follow appropriate skin-care and cooling procedures according to professional guidance.
5. Treat the same tattoo area only once during a session. Do not repeatedly operate over the same spot.
6. The treated area may form a scab after treatment. Avoid soaking the area before the scab forms.
7. Allow the scab to fall off naturally. Do not pick it by hand.
8. Avoid excessive sun exposure, heavy sweating and irritating foods during recovery.
9. The recommended interval between sessions is generally more than 30 days, depending on recovery.

1. Recommended operating distance: approximately 1–2 cm.
2. Temporary redness, swelling or warmth may occur after treatment.
3. Keep the treatment area clean during the recovery period.
4. Avoid direct sun exposure and use appropriate sun protection.
5. If pigmentation remains, another session may be considered after approximately one month, depending on recovery.
6. Avoid irritating skincare products during the recovery period.
7. During the first few days, focus on gentle skin-care and recovery.
8. Avoid sauna, strenuous exercise, smoking and alcohol during the early recovery period.
9. Do not manually remove scabs.
10. Use SPF30+ sunscreen when going outdoors and continue proper sun protection.

Black Face Doll treatment is commonly used in skincare routines focused on brightening, reducing the appearance of dullness, oil-control and pore care.

1. After cleansing, apply a thin and even layer of the appropriate treatment medium and allow it to dry before operation.
2. Install the Black Face Doll treatment head. Suggested energy: 200–500 mJ. Suggested frequency: 2–5 Hz.
3. Maintain approximately 1–2 cm distance from the skin. Beginners are recommended to start at a lower frequency such as 2 Hz.
4. Treat each area once during a session. Avoid repeatedly operating over the same area.
5. After treatment, cleanse the skin gently and continue with moisturizing and hydrating skincare.

Non-invasive 1064 nm Red Probe

For black and blue eyebrow or eyeliner pigment.
Energy: 200–300 mJ
Frequency: 1–3 Hz

Non-invasive 532 nm Blue Probe

For red, brown and coffee-coloured eyebrow pigment.
Energy: 200–300 mJ
Frequency: 1–3 Hz

Minimally Invasive 1064 nm Probe

For black and blue tattoos and deeper pigment.
Tattoo removal energy: 300–600 mJ
Spot removal energy: 600–1000 mJ
Frequency: 1–3 Hz

Minimally Invasive 532 nm Probe

For coloured tattoos and superficial pigment.
Tattoo removal energy: 300–600 mJ
Spot removal energy: 600–1000 mJ
Frequency: 1–3 Hz

Black Face Doll Probe

For brightening, dullness care, oil-control and pore-care routines.
Energy: 200–500 mJ
Frequency: 2–5 Hz

Eyeliner Probe

Designed for eyeliner pigment treatment.
Energy: 200–400 mJ
Frequency: 1–3 Hz

1. Keep the pedal pressed during normal operation according to the device instructions.
2. Practice on suitable test material before first use to become familiar with the equipment.
3. Do not repeatedly switch the machine on and off during operation.
4. Do not operate the device if the treatment area is irritated, inflamed or unsuitable for treatment.
5. Self-operation is not recommended.
6. Suitable protective eyewear must be worn during operation to prevent accidental eye exposure.

Pulse Energy: 500–6000 mJ

Pulse Width: 3–20 ns

Frequency: 1–10 Hz

Voltage: 110–240V

Power: 3000W

Wavelength: 1064 nm / 755 nm / 532 nm

Weight: 8 kg

Size: 50 × 35 × 25 cm

• Picosecond Machine × 1
• Handle × 1
• Goggles × 1
• Eye Protection × 1
• Operation Heads × 6
• User Manual × 1