LASER FacialPure LS006, Home-Use Cordless Picosecond Laser Pen, Suitable for Removing Freckles, Erase Tattoos, Dark Spots and Fading Pigmentation
- days
- :
- hours
- :
- min
- :
- sec
- * 【 Fade Moles, Spots & Tattoos at Home】Targets freckles, age spots, moles, and unwanted tattoos with precision picosecond laser. No more clinic appointments,just treat problem areas in private, on your own schedule.
- * 【9 Speeds and 4 Intensities for Total Control】9 speed settings (fast to slow) + 4 energy levels (gentle to strong). Start low for facial spots, go higher for stubborn ink or deep moles. Adjust until it feels right for your skin.
- * 【Built-In Safety- Position First, Then Fire】Press the positioning button to see exactly where the laser will hit with a visible guide light. Only then press the fire button,no guessing, no accidental exposure.
- * 【Picosecond Precision】Laser pulses fast enough to shatter pigment into dust your body naturally flushes out. 440-460nm wavelength targets melanin directly, leaving surrounding skin untouched.
- * 【Cordless & Long-Lasting】2000mAh rechargeable battery lasts through multiple sessions,no cords tangling you up. Weighs just 222g, fits in one hand, and charges via USB-C.








Tip: When using this product for the first time, we recommend practising on a coloured surface first, such as black spots on fruit or paper. Once you are familiar with the operation, you may use it on the body.
It is recommended to start with the arm before using it on the face or other sensitive areas. For first-time use, always begin with the lowest gear and gradually increase the level according to your skin tolerance. Skin sensitivity varies from person to person, so do not increase the gear too quickly.
- Wear protective goggles before operation.
- Press and hold the Power On button for 2 seconds to turn on the device.
- Briefly press the Laser Intensity Adjustment button to select the desired intensity level.
- Briefly press the Laser Speed button to select the laser emission speed.
- Press the Positioning button. The laser output will emit a guide light to locate the treatment area. Keep holding the positioning button, then press the Emit button to output the laser.
- After operation, press and hold the Power Off button for 2 seconds to turn off the device. If the positioning and emit buttons are not pressed within 5 minutes while the device is on, it will shut down automatically.
Note: The laser will only emit when both the Positioning and Emit buttons are pressed at the same time. Anesthetic should be applied to the treatment area before laser treatment.
- Children and elderly users are prohibited from using this product.
- People with photosensitive skin or those currently using photosensitive medication must not use this product.
- People with implanted life-support devices, such as pacemakers, must not use this product.
- Pregnant women, women preparing for pregnancy, and breastfeeding women are not advised to use this product.
- Do not point the device output towards the eyes or other vulnerable areas. Safety goggles must be worn during use.
- Even when wearing safety goggles, do not look directly at the light emitted from or reflected by the lamp head.
- Do not operate the device in flammable or explosive environments.
- Keep the room well ventilated during operation.
- Use the device away from children. After use, store it out of reach of children.
- Skin sensitivity varies from person to person. Some users may develop blisters during use. This can occur after treatment. The blister skin should be left to absorb naturally when possible. For larger blisters, use a sterilised acne needle to puncture and drain the fluid, then apply a professional ointment. Do not touch the blisters to avoid infection.
- After treatment, the treated area will scab. Avoid spicy foods and alcohol until the scabs fall off naturally.
- Do not get the treated area wet for 24 hours after treatment. For the first three days, gently wipe the area with a warm towel if needed.
- Protect the treated area from sun exposure after treatment and avoid prolonged direct sunlight.
- Rated Voltage: DC 5V
- Working Frequency: 1-9Hz
- Gear Level: 1-4 Levels
- Wavelength: 440nm-460nm
- Battery Capacity: 2000mAh
- Rated Power: <8W
- Product Material: ABS + Stainless Steel
- Product Size: 21 × 4.1 × 3.7 cm
- Product Weight: 222g
- Packaging Size: 24.6 × 13.6 × 4.7 cm
- Packaging Weight: 1100g
- Picosecond Pen × 1
- USB Cord × 1
- Goggles × 1
- Instruction Manual × 1