LASER FacialPure Pro, Home-Use Wireless Picosecond Laser Pen with Blue Light Positioning, Suitable for Fade Tattoos and Dark Spots
- days
- :
- hours
- :
- min
- :
- sec
- * 【 Fade Unwanted Tattoos at Home】Targets blue-black, colored tattoos, or failed permanent eyebrows.No more repeated salon appointments, see pigment lighten with each session and say goodbye to it completely after a few months.
- * 【 9 Energy Levels and 9 Frequency Settings】Fade Unwanted Tattoos at HomeFrom light freckles on the face to dark moles on the body, even old tattoo ink,there's a setting that fits. Adjust energy and frequency separately: low for surface spots, high for deeper pigment.
- * 【Blue Light Guidance for Precision】A visible blue guide light shows exactly where the laser will hit before it fires. Combined with physical carbonization technology, energy is absorbed only by melanin, surrounding skin stays untouched.
- * 【Picosecond Speed for Faster Results】1 picosecond = one trillionth of a second. The laser breaks pigment into fine dust instantly. Less pain than traditional lasers, shorter recovery time.
- * 【Cordless & Rechargeable】Fully charged for continuous use,no cords holding you back. Weighs just 210g (lighter than your phone), easy to carry and simple to operate anytime, anywhere.








How to use?
1. Press the power button for three seconds to turn on the machine. The frequency and energy displays will both show 0.
2. Press the energy and frequency adjustment buttons to the desired levels.
3. Place the picosecond laser pen vertically against the skin surface, aligning the emission port with the desired area.
4. Press the emission button to output energy.
5. To stop operation, release the emission button.
6. Protective eyewear must be worn during blue light operation.
7. To turn off the device, set both the frequency and energy to 0, then press the power button for three seconds. The device will automatically shut down after 3 minutes of inactivity.
Note: Anesthetic should be applied to the skin treatment area before laser treatment.
Energy and Frequency: This picosecond laser pen has nine frequencies and energy levels. A frequency of 1 emits the fewest beams per unit time, while a frequency of 9 emits the most beams per unit time. An energy level of 1 emits the least energy per unit time, while an energy level of 9 emits the most energy per unit time.
CAUTION
1. Avoid eating ginger, as it can cause "ginger bumps," leaving very difficult-to-remove wrinkled scars.
2. Avoid eating spicy foods such as chili peppers.
3. Protect yourself from the sun to prevent excessive melanin deposition.
4. Keep the device clean and avoid exposure to water; do not get it wet for 24 hours.
5. Do not use the device while it is charging. If abnormal heating occurs, disconnect the power immediately.
6. Keep the device out of reach of children and strictly prohibit children from playing with it.
7. Never point the device at your eyes. Do not look into your eyes if the device malfunctions.
Specifications:
Rated Voltage:5V
Working Frequency:1-9HZ
Gear Level:1-9gear
Product Material:ABS+STAINLESS STEEL
Product Size:20*4*3.5CM
Product Weight:210g
Packaging Size:25*13.5*5CM
Packaging Weight:600G
Packing List:
Picosecond Pen*1
USB Cord*1
Goggles*1
Instruction Manual*1