Professional 6-in-1 Hydro Aqua Peeling Machine, Micro Dermabrasion, BIO Face Lifting, Hydrating & Hydro Oxygen Jet for Skin Management & Beauty Care
- days
- :
- hours
- :
- min
- :
- sec
Protect what matters to you
- * 【Deep Cleansing and Nourishment】Utilizes aqua peeling and H2O2 infusion technology to gently remove impurities and dead skin cells while deeply hydrating and infusing oxygen and nutrients. This enhances skin translucency and hydration, leaving it refreshed and glowing.
- * 【Advanced Technology Integration】 Combines ultrasonic infusion, RF lifting, and cooling therapy to boost nutrient absorption, stimulate collagen regeneration, and tighten skin for a comprehensive care experience.
- * 【Addresses Multiple Skin Concerns】Effectively targets issues like dullness, enlarged pores, fine lines, and acne by providing deep cleansing, repair, and rejuvenation for smooth and elastic skin.
- * 【Professional Results with Convenience】Delivers salon-quality treatments while featuring an easy-to-use design, suitable for both professional and home use, catering to the needs of busy lifestyles.
- * 【User-Friendly Design】Prioritizes user comfort with an intuitive interface, lightweight handles, and ergonomic features, ensuring a comfortable and enjoyable experience for all skin types.
1. Clean the treatment area before operation.
2. Connect each handle to its corresponding handle socket.
3. Add the appropriate solution into bottles A, B, and C. Add purified water into bottle D.
4. Connect the power cord to the power socket, then turn on the machine.
5. Select the language that best suits your needs.
Select the solution bottle, then adjust the vacuum and water output settings. Press Start on the system, tap the corresponding function icon on the screen, and press the button on the handle to begin.
If bottle D is selected for skin cleansing, turn on the H2/O2 function on the system.
After treatment, select bottle D, turn off the H2/O2 function, and use your finger to block the handle tip for about 2 minutes to clean the handle tubing.
Apply solution to the skin. Set the intensity to level 5, then start the system. Hold the metal part of the handle and gently move the scrubber across the skin to help remove dead skin cells, blackheads, and surface impurities.
Add toner, essence, or a water-based solution into the spray gun bottle. Press Start on the system or press the button on the handle to begin spraying.
Apply cream, gel, or essence to the skin before use. Start from intensity level 3, then press Start on the system or press the button on the handle to begin treatment.
Recommended treatment time: about 10 minutes.
Apply cream, gel, or essence to the skin before use. Start from intensity level 3, then press Start on the system or press the button on the handle to begin treatment.
Recommended treatment time: about 8 minutes.
Select the cold hammer function to help soothe, calm, and refresh the skin. It is often used after LED mask treatment or after cleansing treatments.
Recommended treatment time: about 10 minutes.
Hydrogen-Oxygen Bubble Mode: Add nutrient solution into bottle A or purified water into bottle B. Activate the ABSORB icon, then adjust the working time, water output, vacuum suction, and hot air bubble level.
Before operating on a client, test the function on the hand to confirm that the suction, water output, and temperature are working properly. Place the vertical probe of the Hydra Pen on the skin and allow it to gently absorb.
Cold Hammer: Activate the COLD icon to start the cooling function.
Nano Water Spray: After activating the SPRY icon, select low, medium, or high spray level. The ampoule bottle should only be filled with water-based products, such as essence or saline.
Ion Rollers / BIO-RF: Activate the corresponding icon, then select the working time, mode, and energy level according to the client’s comfort level. Always start from a low energy level and increase gradually if needed.
Nano Infusion / DOSE: Adjust the dose and energy intensity according to the client’s tolerance. Start low and increase gradually.
1. Before use, fill the solution bottle with purified water or an appropriate nutrient solution. Do not use tap water.
2. Monitor the waste water bottle during operation. When it reaches the upper limit, the machine will alarm. Empty it in time to prevent damage to the instrument.
3. Use with caution on thin skin, fragile skin barriers, or areas with visible redness or capillaries.
4. Use with caution on clients who have recently had facial surgery, intensive peeling, or deep exfoliation and have not fully recovered.
5. After treatment, strengthen hydration care. It is recommended to apply hydrating masks continuously for one week. Avoid strong active skincare products immediately after treatment.
6. After operation, press the START/STOP button, then turn off the main power switch. Gently wipe the control handle with a soft cloth and place it back onto the handle holder.
7. When the instrument is not in use, place it in a ventilated, dry area and cover it with a dust cover.
8. Before use, visually check whether the power cord is deformed, damaged, or broken. If any damage is found, replace the power cord immediately to avoid electrical leakage or fire risk. Also check whether the control handles are abnormal or damaged, and replace them if necessary.
Application: Salon, clinic, beauty center, hospital, home use
Treatment Areas: Brow, face, neck, chest, body
Functions: Nutrient infusion, hydro oxygen cleansing, RF tightening, ultrasonic skin scrubber vibration, skin brightening care
Vacuum Pressure: 60–70 cmHg
Cold Hammer Temperature: 0°C to 5°C
RF Frequency: 1.5 MHz
Power: 80W
Screen Display: 7-inch display
Language: Multi-language support
Handles: 6 handles
Material: ABS + PC
Product Size: 45.5 × 42.5 × 30 cm
Package Size: 47 × 44 × 32 cm
Package Weight: 9000 g
1 × Main Machine
1 × Power Cord
1 × Nine-Polar RF Lifting Head
1 × Cold Hammer Handle
1 × Skin Scrubber Handle
1 × Hydra Pen
1 × Nano Water Spray
1 × Ultrasonic Handle
1 × User Manual
1 × Box
This product is a professional beauty salon instrument. Please read the user manual carefully before use to avoid improper operation.