Professional 10-in-1 Hydro Aqua Peeling Machine, Micro Dermabrasion, BIO Face Lifting, Hydrating & Hydro Oxygen Jet for Advanced Skin Management & Beauty Care

Instrument operation

1.Clean the parts that need to be operated;

2.Install all handles to related handle socket.

3.Input solution inside A.B.C bottles,input pure water inside D bottle. 4.Connect power cord to the power socket, switch on.

5.Choose the language that suits you.

Technology

Hydra Pen: select the solution bottle, set the vacuum and water.Press Start on the system, click the corresponding function icon on the screen,and press the button on the handle. If select bottle D for skin clean, turn on H2,O2 function on the system. After treatment, select bottle D, turn off H2/O2 function,use finger to block the handle tips for 2minutes for cleaning handle pipe.

Bubble pen:Apply cleansing bubbles on the skin, start on the system, press metal on the handle.

Skin srubber: Apply solution on the skin, set intensity 5, start on the system, press metal on the handle to remove dead skin, black head.etc.

Nano water spray: Input toner or acid inside the bottle of spray gun.Press Start on the system or press the button on the handle.

Water Light Spray:Deeper hydration than Nano water spray.

Nine polar RF: Apply cream or essence on the skin. Start intensity from 3, press Start on the system or press the button on the handle to start

treatment. Recommend about 10 minutes.

Ultrasound: Apply cream or essence on the skin. Start intensity from 3, Press Start on the system or press the button on the handle to start treatment. Recommend about 8mins.

LED mask: Clean the skin, and apply paper mask on the face, set mask intensity 5m cover LED mask on the face for 15minutes.

Cold hammer: Select cold hammer to help the skin Soothing, repairing, calming. Recommend about 10 mins.(Usually after LED mask treatment)

Girly line:Scraping beautiful neck ,lifting and tightening contour Essence is introduced to reduce wrinkles.

Tips:

Hydrogen-oxygen bubble mode: Pour the nutrient solution into A solution bottle or introduce purified water into B solution bottle; start up the ABSORB icon;adjust the working hours, water output, vacuum suction and hot air bubble gear; perform functional tests on the hand to ensure that the suction and water output and temperature are properly re-operated for the customer. Apply the vertical probe of the skin pen to the skin and adsorb.

Ice hammer (COLD): lighting icon can work; high molecular water oxygen

(SPRY) after lighting icon can choose low, medium, high gear, ampoule bottles need to use water agent products (e.g. essence, saline, etc.).

Ion rollers (BIO/RF):plasma bipolar desensitization (STRENGTH), etc. Model Light up the icon and choose the working time, mode, energy (from low to high)depending on customer acceptance capacity). Nano-plastic introduction (DOSE):requires adjustment of dose and energy intensity (from low to high) depending on customer acceptance capacity).

Points for attention

1.Before use, please fill the solution bottle with proper pure water or nutrient solution, do not use tap water;

2. Pay attention to the level of the waste water bottle when it reaches the upper limit will alarm, please pour it out in time to prevent damage to the instrument.

3. Skin cuticle thin or zygomatic red blood, careful use.

4. People who have had surgery or deep exfoliation on their faces who

haven't reached recovery are careful.

5.After operation need to strengthen water supply, a week of continuous

application of water surface membrane, do not use efficacy type of water supply products.

6.End of operation,press START/STOP key, then Closed Total power switch. After the operation is finished, gently wipe the control handle with a soft cloth and place it back on the control handle holder.

7.When the instrument is not in use, it should be placed in a ventilated and dry place, covered with a dust shield.

8.Before use,Check if the power line is deformed or broken by the naked eye, if any, it may be caused by leakage of electricity And caused the fire, please replace the new power cord immediately. Check if the control handle is abnormal or broken line, if any, please replace immediately.

Specifications:

Application:Salon / clinic / beauty center / hospital / home

Treatment area:Brow/ face/ neck/ chest/ body

Feature: nutrient import,water oxygen cleaning,RF tightening,shovel vibration,skin whitening

Vacuum Pressure:60-70cmhg

Cold Hammer:0 degree to 5 degree

RF frequency:1.5Mhz

Power: 350W

Screen Display:7 inch

Language:multi-language support

Handles:10 Handles

Package size:47*44*32cm

Package weight:10500g

Packing List:

1*Main Machine

1*Power Cord

1*Nine polar RF Lifting Head

1*Cold Hammer Handle

1*Skin Scrubber Handle

1*Hydra Pen

1*Nano Water Spray

1*Ultrasonic Handle

1*LED Mask

1*Water Light Spray

1*Bubble Pen

1*Girly Line

1*User Manual

1*Box

Special reminder:

This product is a professional beauty salon instrument. Please read the instructions carefully before use to avoid improper operation.