FREYARA Ultimate At-Home RF + EMS + LED Triple-Tech Anti-Aging Facial Beauty Device for Erase Wrinkles, Lift, Tighten, Firming, Skin Glow
- days
- :
- hours
- :
- min
- :
- sec
- * 【Three Interchangeable Probes】The device features three specialized, interchangeable probes, each designed to target different skin concerns and facial zones. The T1 probe deeply cleanses and infuses moisture into the skin, the T2 probe utilizes 1MHz RF energy for lifting and firming, and the T3 probe delivers 94K EMS microcurrents for powerful anti-aging and facial muscle stimulation. With these three probes, you can tackle wrinkles, sagging, and dullness in one device.
- * 【Powerful Tri-Tech Combination】The device combines RF, EMS and LED light therapy for comprehensive, multi-layered rejuvenation. RF heat energy reaches the dermis to trigger collagen and elastin remodeling for deep skin tightening, while EMS works on facial muscles to lift contours and reduce fine lines. Simultaneously, LED therapy uses 415nm (blue), 530nm (green), and 620nm (red) wavelengths to soothe acne, brighten the complexion, and accelerate skin repair.
- * 【Bio-Electric Technology】The device uses a unique combination of electroporation and electroosmosis technology, which creates temporary micro-channels in the skin to help active ingredients from your serums and creams penetrate deeper and more effectively. This ensures that your expensive skincare products are absorbed into the deepest layers.
- * 【 Intelligent Safety & Comfort】The device includes an intelligent thermal sensor on the T2 probe that automatically adjusts temperature to stay within a safe, optimal range and gives an audio warning to prevent burns and over-treatment. The cooling mode on the T1 probe provides a soothing finish, ideal for sensitive skin.
- * 【9 Professional Modes】Clean, Moisture, Eye Care, EMS UP, and Cool for the T1 probe; RF Lift & Tighten for the T2 probe; and MFEP, UP, and EMS for the T3 probe. Each mode comes with pre-set treatment times, This intuitive system allows you to recreate an authentic, professional-grade facial treatment in the comfort of your home.
How to used?
1. Remove all jewelry, earrings, glasses, and contact lenses (if you wear them). Sit in front of a mirror during the treatment for a better experience.
2. Cleanse your face with facial cleanser and water, and pat thoroughly dry. Ensure your hands are clean and dry.
3. Install the probe, aligning it with the positioning hole, inserting it straight in and locking it in place. Do not rotate.
4. Connect the power cord to the device and plug the power plug into a power outlet. (After power is connected, the device emits a short beep, and the blue indicator light on the probe illuminates.)
5. Apply gel or serum to the face (select different skincare products depending on the mode).
6. Press the "M" button to select a mode: T1 probe has 5 modes, T2 probe has 1 mode (pressing the M button has no effect when using the T2 probe), and T3 probe has 3 modes(T1 probe automatically stops running after 3 minutes, T2 and T3 probes automatically stop running after 10 minutes).
7. Intensity adjustment: Press the "^" button to increase the intensity, and press the V button to decrease the intensity.
8. Replace the probe: Press the V button to set the intensity to 0, unplug the probe, and replace it with the required probe.
9. LED mode: Only works with the T3 probe; there are five modes in total.
10. Power off: Simply unplug the power cord.
Usage frequency: T1 probe in COOL mode and T3 probe in EMS mode can be used daily; other modes should be used once every 2-3 days.
Usage time: T1 probe should not be used for more than 3 minutes at a time; T2 and T3 probes should not be used for more than 10 minutes at a time; no more than 3 modes should be used simultaneously.
Precautions:
1. During use, avoid contact with products containing alcohol or acids. Otherwise, the device head surface may oxidize.
2. Do not use any wet wipes for cleaning.
3. Wipe with a soft, damp cloth. Using a rough cloth may scratch the device or reduce its energy output.
4. The device is not waterproof. Do not rinse with water. Do not use or store in bathrooms or other humid environments. Ensure your hands are dry before use.
5. First-time users or those unfamiliar with the device should set the power level to the lowest setting (Level 1).
6. Do not leave the device on the same area for more than one minute continuously to avoid skin problems.
7. When caring for the skin around the eyes, close your eyes before use. Avoid using on mucous membranes such as the eyeballs, upper eyelids, Adam's apple, area around the heart, lips, and mouth.
Packing List:
Device*1
Replacement head*3
Make up Cotton pads*1
Adapter*1
Manual*1
Specifications:
Power: 20W
Frequency:
T2(RF MODE): 1MHZ
T3(EMS MODE): 94K
LED Wavelength:
Blue: 415nm (±10nm)
Green: 530nm (±10nm)
Red: 620nm (±10nm)
Yellow: 590nm (±10nm)
Product size:19.7*5*7cm
Product weight:500g
Packaging size:26*22*9cm
Packaging weight:1000g
There are no faqs for this product.