448kHz 3-in-1 Professional Body Sculptor Device Upgraded Handle, Non-invasive Fat Reduction,Deep Fat Melting, Skin Tightening and Firming

How to used?

1. Install the transparent bracket: Unscrew the three screws on the instrument, align the holes of the transparent bracket with the empty slots on the instrument, insert the screws, and tighten.

2. Install the handles: Insert the JMD fascia knife into the first socket of the distance switch, the CAP ceramic probe handle into the second socket, the RES metal probe handle into the third socket, and the negative electrode plate into the fourth socket. Insert all handles straight in without rotating them. Tighten the nuts after insertion.

3. Power on the instrument: Plug in the power and turn on the instrument.

4. Place the negative electrode plate firmly against the client's back.

5. Install the appropriate probe material and size according to the treatment area: Small probes are used for the face, and large probes are used for the body; the CAP ceramic probe is used for subcutaneous fat removal, facial anti-aging, and lifting and firming; the RES metal probe is used for deep body therapy, uterine warming in women, and shoulder and neck therapy.

6. Apply gel to the treatment area. The probe should be flat against the skin. Click the "Start" button on the instrument screen and perform the treatment using lifting or circular motions. Do not hold the same spot for more than 3 seconds. Start with the lowest energy level. If there is no reaction, gradually increase the energy. Do not set the energy to the highest level all at once. Slight redness of the skin is normal.

7. After use, clean the skin and apply your normal skincare routine. Click the "Pause" button on the device screen.

Note: Avoid the navel area when operating on the abdomen.

Precautions:

1. Do not use if you have had Botox injections, fillers, dental implants, or have implanted metal parts.

2. Remove all metal objects from your body before use.

3. Not for use by pregnant women, those with heart disease, arrhythmia, especially those with implanted pacemakers.

4. Not for use by cancer patients, patients who have undergone major surgery, or diabetic patients.

5. Not for use by patients with epilepsy or severe hypertension.

6. Not for use by those with allergies or severe skin wounds.

7. Operators must be familiar with the operation manual and procedures, ensuring all wires are connected correctly and securely.

8. Do not excessively bend or twist the power cord to prevent fire or electric shock.

9. Do not use this device in unstable environments, such as tilted, vibrating, or impacted environments.

10. The device must not contain moisture or debris. If any foreign objects are found, please contact the company immediately.

11. When moving the instrument, the power plug must be unplugged, and vibration should be avoided as much as possible.

12. The instrument should be placed in a stable location, with at least 5 cm of clearance around it to ensure air circulation and facilitate heat dissipation.

13. This instrument must not be used near radios, televisions, photocopiers, fax machines, or similar equipment.

14. Do not use this instrument simultaneously with other instruments (such as microwave ovens) to avoid interference and malfunction.

15. Do not use this instrument in the following environments: direct sunlight, high humidity, near water, under vibration, tilted, in strong magnetic fields, near electromagnetic waves, pulsed voltages, near chemical storage areas, or in environments with corrosive gases.

Specifications

Material:ABS

Power:max350W

Packaging size: 54*42*33cm

Packaging weight: 7200g

Packing List

Machine*1

Handles*3

Ceramic Probe*4

Metal Probe*4

Negative Plate*1

Power Cord *1

Manual*1