RF - FacialFirming 3.0,The Dual-Head RF Lifting Beauty Instruments,Professional Rejuvenation, Home Use
- days
- :
- hours
- :
- min
- :
- sec
- * 【4MHz Bipolar RF】Utilizes professional-grade 4MHz bipolar radio frequency technology. Its energy precisely reaches 3mm beneath the skin to efficiently stimulate collagen regeneration, combating sagging and wrinkles at their root.
- * 【150W High Power】Delivers a powerful 150W of energy for stable, deep, and effective penetration. Experience visibly firmer skin after just one session and enjoy salon-level anti-aging results from the comfort of your home.
- * 【Dual Detectors for Targeted Care】Features exclusive dedicated detectors for the face and eyes. The larger facial detector lifts and tightens efficiently, while the smaller eye detector gently targets the delicate eye area to reduce crow's feet and under-eye bags for comprehensive anti-aging.
- * 【RF + LED Light Therapy Synergy】Combines skin-tightening RF with 650nm red light therapy. This dual-action approach improves microcirculation, accelerates skin metabolism, and delivers both firming and rejuvenating effects for a radiant, youthful glow.
- * 【Patented & Safety Tested】The core technology and detectors are certified by national patents and validated through rigorous lab testing. Proven to effectively enhance skin elasticity and promote collagen renewal, ensuring a safe and reliable skincare solution
How to used?
1.Before use,the caregiver is required to fully remove the makeup and ensure that the face and neck are clean.
2.Connect the power cord,gently press the ON/OFF button On the host,Operation start,power off need unplug power supply.
3.Daub and make sure there is enough gel onthe skin.
4.Start adjusting according to the energy adapted by the skin (it is recommended to adjust from asmall energy).
5.Mode operation:After power on,rotate the ENERGY button to switch the A/B operation mode.There are two operation modes;
(1)Mode A:The red light is on.Press the handle button to intermittently output energy.
(2)Mode B:The blue light is on,press the handle work button,and the energy output lasts for 1 second.Press the button again,and the energy output stops.
6.Operation process:Light display above handle front end.
7.After use,clean the skin and use the replenishment mask for 10-15 minutes.
The operation detector is divided into:face operation detector and eye operation detector.Operate a single part(eye lines,legal lines)for 15 minutes,half of the face for 30 minutes and the whole face for 45 minutes.If the user feels that the heat is too large,reduce the energy.If there is slight thermal pain,it indicates that the pain is tolerableand the parts that need to care.
Precautions:
1.The operating head shall be close to the skin during operation.
2.The position with less fat such as cheekbones,frontal bones and eyes has obvious heat feeling.It is recommended to reduce energy.
3.When replacing the operating detector,push the pushing and twisting part,and the detector will pop up automaticalily.Do not pull it hard.
4.After each operation,the operating detector needs to be cleaned with warm water or normal saline.
Note:
During operation, the probe must be close to the skin, otherwise there will be a momentary tingling sensation!
Specifications:
Material:ABS
Power:150W
Electric Source:AC90V-240V 50HZ/60HZ
Frequency:700-1060HP
Energy Output Mode:Keyboard control
Product Size: 24.6*27.6*17.6cm
Product Weight: 1000g
Packaging Size: 36.7*32.3*25cm
Packaging Weight: 2800g
RF
Power: 4j/cm²
Action area: 3cm²(FACE),1.5cm²(EYES)
Frequency: 4mhz
Action depth: 3mm
LED
Wavelength: 650nm
Intensity: 5000mcd
Packing List:
Machine*1
Power line *1
Manual*1
There are no faqs for this product.