LED-FacialGlow 4D,Professional 8-Color LED Light Therapy Silicone Mask for Face and Neck Anti-aging and Brightening, 400 Beams of Light

Installation Diagram

1. Please fully charge the mask and controller before use.

2. Installing equipment bandages.

3. 2.4G wireless connection. Press and hold the mask for1.5 seconds to turn it on.After pressing and holding theremote control for 1.5 seconds to turn it on, it can be used.

Tips:Before use,please irradiate the face for 1 minute,no discomfort symptoms can continue to use.

Please start using from low gear,build skin tolerance and choose the energy level according to the actual skin condition.Please do not blindly increase the time and frequency of light,you need to adjust the length of light according to the actual skin condition.It is recommended to use this product 3-5 times a week,a single use time of 10 minutes,a continuous cycle of 4weeks.

Host Usage

1.Long press to turn on/off (it will automatically turnoff after 10 minutes of operation by default)

2.Short press to switch light sources, with seven typesof light sources available for cyclic switching.

Remote Control Usage

1.Please turn on the host switch before operating the controller.When the host is turned on, long press the controller “M” button to turn it on,short press to switch light sources, seven types of light sources can be cycled.

2.NIR on/off:After the device is turned on, the infrared mode is turned off by default. Lightly press to “NIR” button infrared mode on/off. When this mode is enabled,The “NlR” light on the display screen is on.

3.Energy Adjustment:After turning on the device, the default energy level is level 1,Lightly press to “E” button enhanced energy,3-speed energy cycle adjustment.

4.Time Adjustment:After the device is turned on, the default time is 10 minutes,which is displayed as "10" on the screen.Lightly press the “T” key to increase the time by 5 minutes.10/15/20/25/30 minutes, 5 levels can be cyclically adjusted.

Charging instructions:

Host charging method:Please fully charge the device when using it for the first time.Charging indicator light red,fully charged indicator light green.

Remote control charging method:When chargingis in progress, the batterylevel display will flash in increments, Three lights on simultaneously indicate charging completion.

Note

Before using this product for the first time,please conduct a photosensitivity test.

1.Place the device on your arm,turn on the switch,and let it emit light for 10 minutes.If symptoms such as skin redness or itching occur,you may have photosensitive substances.We suggest that you stop using the product or consult a beautician before using it again.

2.Before use,please clean your face and keep it dry(without makeup).Cosmetics may contain photosensitive ingredients that may affect the skin care effect.

3.After use,the skin may appear red,which is a normal reaction of the skin and will return to normal within 1-2 hours.If there is a burning sensation or any other discomfort during use,please stop using immediately.

4.Please apply a facial mask to replenish water after use and avoid direct sunlight.Repeat 3 times a week for 4 weeks for better results.

Specifications:

Product material: medical grade silicone

Number of lamp beads: 400 beads of light(100 LED)

Battery capacity: 2000mAh

Output power: 2W

Product voltage: 3.7V

Charging time: 3-4 hours

Energy: 3-speed energy

Timing: 10/15/20/25/30 minutes, 5 levels

Product size: 19.6*26.6*8.8cm(face); 21.8*10.4*0.5cm(neck)

Product Weight: 260g(face); 80g(neck)

Package size: 23*22.8*11.2cm

Package Weight: 940g

Packing List: 

Face Mask beauty instrument*1

Neck beauty instrument*1

Controller*1

USB cable*1

Face Mask Fixed strap*2

Neck Fixed strap*2

Instruction manual*1