Hello! If you have just received the 80K 3-in-1 RF Cavitation Machine (TS00105) and are using it for the first time, here is what you need to know: Does the fat burning head generate heat? Cavitation (80K) Probe: The ultrasonic cavitation head does not generate noticeable heat because it uses high-frequency sound waves (80kHz) to break up fat cells. It may cause a slight vibration or a slight sensation, but it will not feel warm. RF (Radio Frequency) Probe: The RF head generates heat as it penetrates the skin to stimulate collagen and tighten the skin. However, it may take several minutes for the heating effect to become noticeable, depending on your skin type and the settings used. Why does the gel feel cold? The gel is naturally cool when first applied to the skin. This is common with conductive gels used in beauty devices. To reduce discomfort, you can: Warm the gel slightly before application (do not overheat). Use a smaller amount of gel to minimize the cooling effect. Keep the device in continuous motion over the skin to prevent overcooling of an area. How to ensure proper operation Check the settings - make sure you have selected the correct mode and intensity level. Ensure proper contact - the probe should be pressed firmly against the skin. Try different areas - some parts of the body may feel warmth quicker than others. If your RF probe is not generating heat at all, even after several minutes of use, try increasing the intensity. If the problem persists, contact Freyara Customer Support for further assistance.  

Hello, you need a more powerful machine for what you are talking about. You can choose our 80k 9in1. 

Recommended options: If you are mainly targeting the abdomen and arms, 40K is recommended because it has better penetration and is suitable for thicker fat layers. If you have a thinner fat layer or want to target detailed areas (such as the face or forearms), you can consider 80K. Additional advice When using radio frequency (RF), avoid getting close to the chest to avoid heating the silicone implants. If you use a laser pad (Lipo Laser), it can be used on the abdomen and arms, but still 

Recommended options: If you are mainly targeting the abdomen and arms, 40K is recommended because it has better penetration and is suitable for thicker fat layers. If you have a thinner fat layer or want to target detailed areas (such as the face or forearms), you can consider 80K. Additional advice When using radio frequency (RF), avoid getting close to the chest to avoid heating the silicone implants. If you use a laser pad (Lipo Laser), it can be used on the abdomen and arms, but still 

Use 1-2 times, 10-20 minutes each time. 

Hello, we can deliver to Canada. 

There is metal on the ears and the radio frequency head can be used on the face. 

There is metal on the ears and the radio frequency head can be used on the face. 

Hello, we ship worldwide. 

Hello, it is recommended to use it 3 to 4 times a week, and each use takes about 10 minutes. And it is recommended to use the negative pressure head once a week. It doesn't matter if the skin is slightly red. It usually takes 10 to 15 minutes. Each probe must be used with a product, essential oils, lotions, creams and gels are all OK. Do not dry burn the probe.